*White 2 pair Telephone Cable
*LineJack 2/1A Telephone Socket with fixings
*White Cable Clips
*IDC Plastic Insertion Tool
*Full fitting Instructions

Excellent quality solid core twisted copper round cable to BT Spec CW1308.

2 pair - 4 wires (up to two phone lines).

We do not use "flat" lower quality cheaper cable. Our kit allows you to hardwire your extension in properly, (easy when following the instructions) instead of just plugging in like other kits, which can be unsightly and risk being pulled out easily. We include full fitting instructions and a number to call an actual engineer direct for help if needed. See our Feedback page for customer comments on our socket pack purchases.

Code: ISP-15
Size: 15 meter pack
Price: �15.99

*White 2 pair Telephone Cable
*LineJack 2/1A Telephone Socket with fixings
*White Cable Clips
*IDC Plastic Insertion Tool
*Full fitting Instructions

Excellent quality solid core twisted copper round cable to BT Spec CW1308.

2 pair - 4 wires (up to two phone lines).

We do not use "flat" lower quality cheaper cable. Our kit allows you to hardwire your extension in properly, (easy when following the instructions) instead of just plugging in like other kits, which can be unsightly and risk being pulled out easily. We include full fitting instructions and a number to call an actual engineer direct for help if needed. See our Feedback page for customer comments on our socket pack purchases.

Code: ISP-30
Size: 30 meter pack
Price: �19.99

*Black 2 pair Telephone Cable
*LineJack 2/1A Telephone Socket with fixings
*Black Cable Clips
*IDC Plastic Insertion Tool
*Full fitting Instructions

Excellent quality solid core twisted copper round cable to BT Spec CW1308.

2 pair - 4 wires (up to two phone lines).

Suitable for external use as will not break down in UV light. We do not use "flat" lower quality cheaper cable. Our kit allows you to hardwire your extension in properly, (easy when following the instructions) instead of just plugging in like other kits, which can be unsightly and risk being pulled out easily. We include full fitting instructions and a number to call an actual engineer direct for help if needed. See our Feedback page for customer comments on our socket pack purchases.

We recommend using Jel crimps (connectors) if you are joining cable outside for a watertight connection.

For more info on our black cable, click here and scroll down to point 7c

Code: ESP-15
Size: 15 meter pack
Price: �15.99

*Black 2 pair Telephone Cable
*LineJack 2/1A Telephone Socket with fixings
*Black Cable Clips
*IDC Plastic Insertion Tool
*Full fitting Instructions

Excellent quality solid core twisted copper round cable to BT Spec CW1308.

2 pair - 4 wires (up to two phone lines).

Suitable for external use as will not break down in UV light. We do not use "flat" lower quality cheaper cable. Our kit allows you to hardwire your extension in properly, (easy when following the instructions) instead of just plugging in like other kits, which can be unsightly and risk being pulled out easily. We include full fitting instructions and a number to call an actual engineer direct for help if needed. See our Feedback page for customer comments on our socket pack purchases.

We recommend using Jel crimps (connectors) if you are joining cable outside for a watertight connection.

For more info on our black cable, click here and scroll down to point 7c

Code: ESP-30
Size: 30 meter pack
Price: �19.99

*Black 2 pair Telephone Cable
*LineJack 2/1A Telephone Socket with fixings
*Black Cable Clips
*IDC Plastic Insertion Tool
*Full fitting Instructions

Excellent quality solid core twisted copper round cable to BT Spec CW1308.

2 pair - 4 wires (up to two phone lines).

Suitable for external use as will not break down in UV light. We do not use "flat" lower quality cheaper cable. Our kit allows you to hardwire your extension in properly, (easy when following the instructions) instead of just plugging in like other kits, which can be unsightly and risk being pulled out easily. We include full fitting instructions and a number to call an actual engineer direct for help if needed. See our Feedback page for customer comments on our socket pack purchases.

We recommend using Jel crimps (connectors) if you are joining cable outside for a watertight connection.

For more info on our black cable, click here and scroll down to point 7c

Code: ESP - 50
Size: 50 meter pack
Price: �24.99

*Black 2 pair Telephone Cable
*LineJack 2/1A Telephone Socket with fixings
*Black Cable Clips
*IDC Plastic Insertion Tool
*Full fitting Instructions

Excellent quality solid core twisted copper round cable to BT Spec CW1308.

2 pair - 4 wires (up to two phone lines).

Suitable for external use as will not break down in UV light. We do not use "flat" lower quality cheaper cable. Our kit allows you to hardwire your extension in properly, (easy when following the instructions) instead of just plugging in like other kits, which can be unsightly and risk being pulled out easily. We include full fitting instructions and a number to call an actual engineer direct for help if needed. See our Feedback page for customer comments on our socket pack purchases.

We recommend using Jel crimps (connectors) if you are joining cable outside for a watertight connection.

For more info on our black cable, click here and scroll down to point 7c

Code: ESP - 75
Size: 75 meter pack
Price: �34.99

Grey external junction box for connecting telephone cable neatly. Five Gel crimps included FREE for watertight connections.

Screws/fixings included

Code: EJB
Size: 120mm x 90mm
Price: �13.99

1 x clamp for dropwire cable
1 x triangular bracket

Code: BC
Size: clamp 470mm bracket 80mm x 58mm x 58mm
Price: �6.99

Small white internal junction box for connecting telephone wires. The base has screw holes for wall mounting.

Code: IJB
Size: 53mm x 39mm
Price: �4.99

Save money by purchasing an NTE5 and Plastic Insertion Tool together.

This socket should be the first socket on your line and is the socket that our BT Faceplate Filters can be fitted to.

The NTE-5a consists of three parts, a surface-mounting box, the NTE-5a front section incorporating a test socket, and the standard removable faceplate.

The removable connection unit provides a clear demarcation between the customer extension wiring and the network operator's line. There are IDC terminals A and B on the rear for the incoming line to be connected.

Our NTE5 is manufactured by Pressac, who also supply BT. So essentially this is the same product that BT use just without the logo.

* Used as a master socket for phones, faxes etc
* Used as a connection point for extension wiring
* Made from white high gloss V0 rated material,
* NTE 5's can be either flush or surface mounted.
* 8.5cm square
* Fitting instructions included

Code: NTEPLIT
Size: N/A
Price: �8.99

Save money by purchasing an NTE5 and professional quality Punchdown Insertion Tool together.

This socket should be the first socket on your line and is the socket that our BT Faceplate Filters can be fitted to.

The NTE-5a consists of three parts, a surface-mounting box, the NTE-5a front section incorporating a test socket, and the standard removable faceplate.

The removable connection unit provides a clear demarcation between the customer extension wiring and the network operator's line. There are IDC terminals A and B on the rear for the incoming line to be connected.

Our NTE5 is manufactured by Pressac, who also supply BT. So essentially this is the same product that BT use just without the logo.

Professional quality tool for inserting wires into the sockets. No need to strip insulation and designed for use with solid core (not multistrand) wire. Wire is trimmed automatically as connection is made. Comes in a handy plastic wallet.

* Used as a master socket for phones, faxes etc
* Used as a connection point for extension wiring
* Made from white high gloss V0 rated material,
* NTE 5's can be either flush or surface mounted.
* 8.5cm square
* Fitting instructions included

Code: NTEPIT
Size: N/A
Price: �14.99

Save money by purchasing an NTE 5A with an BT Openreach ADSL Faceplate Filter and Insertion tool.

If you do not want lots of other filters around the house then this is for you.

All brand new and sealed, easy to fit and come with clear instructions

The NTE5 master is normally the first socket on your line. The bottom section of the NTE5 is removable allowing the adsl faceplate filter to be fitted. Once the faceplate filter has been fitted it will filter all extensions around your house. You will not need any further separate filters. The NTE-5a consists of three parts, a surface-mounting box, the NTE-5a front section incorporating a test socket, and the standard removable faceplate.

The removable connection unit provides a clear demarcation between the customer extension wiring and the network operator's line. There are IDC terminals A and B on the rear for the incoming line to be connected. The NTE is 8.5cm square and can be surface mounted using the supplied backbox or flush mounted using a single gang wallbox.

Our NTE5 is manufactured by Pressac, who also supply BT. So essentially this is the same product that BT use just without the logo.

This faceplate filter is a quality genuine BT Openreach product. It attaches to the removable bottom section of your master NTE5 socket. Once the faceplate filter has been fitted it will filter all extensions around your house. You will not need any further separate filters. It has connections on the front to plug in an adsl modem and a telephone. There are IDC push in terminals which allow you to connect to filtered extensions. If necessary you can also connect a hard wired alarm system and is fully compatible with both BT ADSL and ADSL2+ services.

The BT Openreach ADSL Splitter is a plug in face plate that replaces the customer access panel of standard Network Termination Units NTE5 and CTE5. It provides outlet ports for computer network and BT telephone sockets. In addition a terminal is provided on the rear of the unit for extension wiring.

Note: Your broadband is only available where the NTE5 & faceplate filter have been fitted. If you wanted BB in your study upstairs then the NTE5 and faceplate would need to moved there. You will not need filters on the other extensions if you use the faceplate filter. If you choose to use a plug in adsl filter for your broadband, then other filters must be in place on other extensions.

Code: NTEFPLIT
Size: N/A
Price: �24.99

This socket should be the first socket on your line and is the socket that our BT Faceplate Filters can be fitted to.

The NTE-5a consists of three parts, a surface-mounting box, the NTE-5a front section incorporating a test socket, and the standard removable faceplate.

The removable connection unit provides a clear demarcation between the customer extension wiring and the network operator's line. There are IDC terminals A and B on the rear for the incoming line to be connected.

We recommend an insertion tool to help with fitting. See our special offer above to purchase both together. Instructions also supplied.

Our NTE5 is manufactured by Pressac, who also supply BT. So essentially this is the same product that BT use just without the logo.

* Used as a master socket for phones, faxes etc
* Used as a connection point for extension wiring
* Made from white high gloss V0 rated material,
* NTE 5's can be either flush or surface mounted.
* 8.5cm square
* Fitting instructions included

Code: NTE
Size: N/A
Price: �7.49

This faceplate filter is a quality genuine BT Openreach product. It attaches to the removable bottom section of your master NTE5 socket. Once the faceplate filter has been fitted it will filter all extensions around your house. You will not need any further separate filters. It has connections on the front to plug in an adsl modem and a telephone. There are IDC push in terminals which allow you to connect to filtered extensions. If necessary you can also connect a hard wired alarm system and is fully compatible with both BT ADSL and ADSL2+ services.

The BT Openreach ADSL Splitter is a plug in face plate that replaces the customer access panel of standard Network Termination Units NTE5 and CTE5. It provides outlet ports for computer network and BT telephone sockets. In addition a terminal is provided on the rear of the unit for extension wiring.

Note: Your broadband is only available where the NTE5 & faceplate filter have been fitted. If you wanted BB in your study upstairs then the NTE5 and faceplate would need to moved there. You will not need filters on the other extensions if you use the faceplate filter. If you choose to use a plug in adsl filter for your broadband, then other filters must be in place on other extensions.

(This unit does not come with an NTE5 socket, you would need to purchase that separately).

Code: FPF
Size: N/A
Price: �19.99

Good quality ADSL microfilter.

If you are getting interference on your line, you might need to use filters. ADSL Filters are required as the ADSL service is not compatible with your ordinary phone line (causes crackling and interference) as it is a high frequency signal. The filter keeps the ADSL and phone signal apart. Filters are needed for each socket throughout your house, (not un-used extensions) whether it is a telephone, dial-up modem, Fax machine, Satellite receiver, or Burglar alarm (if connected to a telephone line). Simply plugs into the wall then you plug the phone/modem into it.

Code: MF
Size: N/A
Price: �2.99

Excellent quality solid core twisted copper round cable to BT Spec CW1308.

2 pair - 4 wires (up to two phone lines).

Suitable for external use as will not break down in UV light. We do not use "flat" lower quality cheaper cable. Black cable clips and Jelly Crimps to ensure a water tight seal are also available to purchase.

For more info on our black cable, click here and scroll down to point 7c

Code: EC2-20
Size: 20 Meters
Price: �10.99

Excellent quality solid core twisted copper round cable to BT Spec CW1308.

2 pair - 4 wires (up to two phone lines).

Suitable for external use as will not break down in UV light. We do not use "flat" lower quality cheaper cable. Black cable clips and Jelly Crimps to ensure a water tight seal are also available to purchase.

For more info on our black cable, click here and scroll down to point 7c

Code: EC2-30
Size: 30 meters
Price: �14.99

Excellent quality solid core twisted copper round cable to BT Spec CW1308.

2 pair - 4 wires (up to two phone lines).

Suitable for external use as will not break down in UV light. We do not use "flat" lower quality cheaper cable. Black cable clips and Jelly Crimps to ensure a water tight seal are also available to purchase.

For more info on our black cable, click here and scroll down to point 7c

Code: EC2-50
Size: 50 meters
Price: �21.99

Excellent quality solid core twisted copper round cable to BT Spec CW1308.

3 pair - 6 wires (up to three phone lines).

Suitable for external use as will not break down in UV light. We do not use "flat" lower quality cheaper cable. Black cable clips and Jelly Crimps to ensure a water tight seal are also available to purchase.

For more info on our black cable, click here and scroll down to point 7c

Code: EC3-50
Size: 50 meters
Price: �23.99

5 x Three wire gel-filled IDC butt connectors, specifically for connecting telephone wires outside to achieve a water-tight seal. Clear body to ensure positive termination. Can also be used to join internal cable. Use one Jelly Crimp for each wire inside the cable. You will need 4 crimps for 2 pair cable for one connection. Instructions included.

Code: JC-5
Size: QTY 5
Price: �2.49

10 x Three wire gel-filled IDC butt connectors, specifically for connecting telephone wires outside to achieve a water-tight seal. Clear body to ensure positive termination. Can also be used to join internal cable. Use one Jelly Crimp for each wire inside the cable. You will need 4 crimps for 2 pair cable for one connection. Instructions included.

Code: JC-10
Size: QTY 10
Price: �4.49

We recommend 1-2 clips per metre of cable. Good quality round black cable clips with a strong sterdy nail. 4-5 mm

(Note: We may send either 4 or 5mm clips - both sizes fit 2 pr cable. If clips are required for 3pr cable, please let us know so that 5mm clips are dispatched)

Code: ECC-50
Size: QTY 50
Price: �1.99

Excellent quality solid core twisted copper round cable to BT Spec CW1308.

2 pair - 4 wires (up to two phone lines).

White cable clips are also available to purchase.

Code: IC-15
Size: 15 Meters
Price: �9.99

Excellent quality solid core twisted copper round cable to BT Spec CW1308.

2 pair - 4 wires (up to two phone lines).

White cable clips are also available to purchase..

Code: IC-30
Size: 30 Meters
Price: �14.99

Excellent quality solid core twisted copper round cable to BT Spec CW1308.

2 pair - 4 wires (up to two phone lines).

White cable clips are also available to purchase.

Code: IC-50
Size: 50 Meters
Price: �19.99

We recommend 1-2 clips per metre of cable. Good quality round white cable clips with a strong sterdy nail. 4-5 mm

(Note: We may send either 4 or 5mm clips - both sizes fit 2 pr cable. If clips are required for 3pr cable, please let us know so that 5mm clips are dispatched)

Code: CC-50
Size: QTY 50
Price: �1.99

Professional quality tool for inserting wires into the sockets. This is recommended if you have more than one socket to connect. No need to strip insulation and designed for use with solid core (not multistrand) wire. Wire is trimmed automatically as connection is made. Comes in a handy plastic wallet.

Code: PIT
Size: N/A
Price: �8.49

Low cost, plastic tool for inserting wires into the sockets. Recommended if you are only using for one socket. No need to strip insulation and designed for use with solid core (not multistrand) wire.

Code: PLIT
Size: N/A
Price: �1.49

This is a small discreet socket. Easiest to fit for DIY purposes, as on a domestic line only two wires need to be connected. Can be used in place of a 2/1A master socket.

* Surface mounting single outlet
* Manufactured in white high gloss ABS material

Code: 2/2
Size: N/A
Price: �2.99

This is a small discreet secondary socket. Fairly easy to fit for DIY purposes as on domestic lines it will require three wires to be connected.

* Surface mounting single outlet
* Manufactured in white high gloss ABS material

Code: 2/3
Size: N/A
Price: �2.49

This is a single master socket. Again these are easy to fit, as only two wires need to be connected. They do not come with a back box, this would need to be purchased separately.

* Standard sized single outlet for surface or flush mounting
* Designed to fit any standard back box 85 x 85
* Manufactured in white high gloss ABS material

Code: 3/2
Size: N/A
Price: �3.49

This is a double master socket. You can either run two lines on it or connect the circuits together to run a single line with two outlets. Again these are easy to fit, as only two wires per line need to be connected. They do not come with a back box, this would need to be purchased separately.

* Standard sized double outlet for surface or flush mounting
* Designed to fit any standard back box 85 x 85
* Manufactured in white high gloss ABS material

Code: 4/2
Size: N/A
Price: �4.49

Single gang 22mm Back box to fit our LJ3/2 and LJ4/2A socket. This is a fairly shallow back box finished in white.

Code: BB
Size: N/A
Price: �1.99

Features:
1 exchange line
5 extensions
Reception phone extension
Door phone compatible
Door relay facility
Call waiting
Call forward
Music/Info on hold
Call me, follow me, transfer to me
Answering machine compatible

This is a small telephone system ideal for small office, home office and residential users. It is an advanced system but very easy to use and has many benefits seen in larger more expensive models. A cost effective simple system ideal for DIY installations. Comes with a comprehensive manual and handbook.

The system is compatible with faxes, modems for Internet connections, intercoms and door entry systems. Network services such as home highway or call sign services can also be connected.

Many of the features such as call waiting, call forward, follow me and transfer to me as well as call barring to prevent designated phones from making external calls are included in the system which you would only expected from much larger systems.

A two line, 10 extension system is also available - please email for further info.

This model is easy to program and operate using standard telephones which has TBR (timed break recall) dialling. Most phones have a switch on the bottom to set this.

New and sealed, not seconds or repaired. Designed and manufactured in the UK.

Warranty/Technical help: A full 12 month warranty is included. Plus free technical help is available by email or phone. (see contact page)

Delivery method - We will send by Royal Mail special delivery. Please allow 5-7 working days for delivery.

Please email me any questions you may have.

Code: TS5
Size: 1 line - 5 extensions 261mm x 102mm x 63mm
Price: �259.00

FOR OFFICE USE ONLY

Code: 75 IP
Size: N/A
Price: �75.00

FOR OFFICE USE ONLY

Code: 135 IP
Size: N/A
Price: �135.00

FOR OFFICE USE ONLY

Code: 110 IP
Size: N/A
Price: �110.00

FOR OFFICE USE ONLY

Code: 5 IP
Size: N/A
Price: �5.00

FOR OFFICE USE ONLY

Code: 10 IP
Size: N/A
Price: �10.00

FOR OFFICE USE ONLY

Code: 60 IP
Size: N/A
Price: �60.00

FOR OFFICE USE ONLY

Code: 100 IP
Size: N/A
Price: �100.00

FOR OFFICE USE ONLY

Code: 50 IP
Size: N/A
Price: �50.00